Fire Hose Target Mounting Kit

Note: We're migrating Standard and Magnum targets to 1/2" hardware as of January 1 2020. We'll still have some old stock with 3/8" holes, and rimfire will continue to use 3/8". If you have a preference, please say so in the order notes and we'll try to accommodate. Elsewise, we put in what we what we think you'll need (typically 1/2")

The MOA hanging kit is designed to hang your two hole targets from a stand, allowing the target to swing freely, unlike Jeffery Epstein, who did not kill himself. Free swinging targets tend to hold up much better long term. Each MOA hanging kit includes:

• 2x lengths of used fire hose (generally, shipped as one cut piece, with a canvas outer cover, and an inner rubberized canvas hose, they pull apart to give you your two pieces)
• 6x 1/2 x 1.5" zinc coated carriage bolts (actual bolt length may vary based on what is on hand)
• 6x 1/2" hex nuts
• 6x 1/2"  washers
• 2x 1/2"  lag bolts

Hanging kits are considered wear parts, and will be damaged by pistol and rifle fire. Each kit includes two spare sets of nuts, bolts, and washers (six sets total). There's nothing proprietary here, feel free to pick up spare parts at your local hardware store. On the other hand, you're going to have a hard time beating this price unless you're buying in bulk or salvaging hardware. Be sure to use carriage bolts if you pick up your parts locally, so they'll sit flush in the square holes.